ضخامت سنج فلز dakota

Physical

Weight:

10 ounces (with batteries).

Size:

2.5 W x 4.5 H x 1.24 D inches

(63.5 W x 114.3 H x 31.5 D mm).

Operating Temperature:

-20 to 120F (-30 to 50C).

Case:

Extruded aluminum body

with nickel-plated aluminum

end caps (gasket sealed).

Keypad

Sealed membrane that is

resistant to both water and

petroleum products.

Six or nine tactile-feedback keys.

Transducer

Dual-element (transmit and

receive).

1 to 10 MHz frequency range.

Locking quick disconnect

LEMO connectors.

4 foot cable.

Custom transducers available

for special applications.

& Thickness

Gauge

Power Source

Two 1.5V alkaline or

1.2V NiCad AA cells.

Typically operates for

80 hours on alkaline and

20 hours on NiCad.

Display flashes when battery is

low. Unit turns off automatically

when battery is too low to

operate reliably.

Display

Multi-function 4.5 digit liquid

crystal display with 0.500 inch

numerals, backlit for use in

poor light conditions.

Backlight is selectable on/off/auto

(illuminates only when taking a

measurement).

Bar graph indicates stability

of reading.

Software

Comes complete with cable and

PC software (MX-5 DL only).

Memory

Numeric data storage, 10 files of

100 readings per file, for 1000 readings

(MX-5 DL only).

Certification

Factory calibration traceable to NIST

& MIL-STD-45662A.

Warranty

5 year limited.

Measuring

Range:

Measures from 0.025 to 19.999

inches (0.63 to 500 millimeters).

Range dependent on material

and transducer type.

Units:

English & Metric

Resolution:

0.001 inches (0.01 millimeters)

Velocity Range:

0.0492 to .5511 in/μs.

(1250 to 14,000 m/sec)

Four readings per second for

single point measurements, or

16 per second in

Scan Mode-

captures the minimum thickness.

Features (MX-5, MX-5-DL)

Differential Mode:

Enter acceptable thickness value,

unit will display+/- the difference

from the value entered.

Alarm Mode:

Enter a minimum acceptable

thickness value. If measurement

falls below minimum, red LED will

illuminate and sound beeper. If

measurement is above minmum

value, green LED will illuminate.

Data Output:

RS232 serial interface. PC software

& USB converter cable included