سروو درایو B&R مدل ACOPOS 1180

Achievable safety classifications (safety integrity level, safety category, performance level) are documented in the user's manual (section "Safety technology").
2) TT and TN power systems are commonly referred to as "Delta/Wye with grounded wye neutral" in the USA.
3) Limit values from EN 61800-3 C3 (second environment).
4) Current consumption depends on the respective configuration of the ACOPOS servo drive.
The inrush current is significantly higher than the value for current consumption and can be estimated according to the input capacitance.
5) If the mains input voltage is present (3x 400 VAC to 480 VAC ±10%), the 24 VDC supply voltage for the ACOPOS servo drive is generated by the internal
DC bus power supply unit, reducing the 24 VDC current consumption (I24VDC) to 0.
6) If the mains input voltage (3x 400 VAC to 480 VAC ±10%) is not present, the voltage on the 24 VDC output is generated from the 24 VDC power supply of
the ACOPOS servo drive; in this case, it lies between the maximum permissible and the (reduced by a maximum of 2.5 V) minimum permissible 24 VDC
power supply of the ACOPOS servo drive.
7) Valid under the following conditions: mains input voltage 400 VAC, nominal switching frequency, 40°C ambient temperature, installation elevation <500 m
above sea level.